Product introduction

D series fork type slider pneumatic actuator is used to turn the linear motion of the cylinder piston into rotation, with uniform rotation speed and output torque. It is more suitable for driving partial rotary valves such as ball valves and butterfly valves.

The fork type slider pneumatic actuator pushes the slider on the fork to drive the fork to turn the linear motion of the cylinder piston into rotation through the linear motion of the cylinder piston. The output torque and rotation speed are uneven. The torque is small in the middle of the two ends of the stroke, and the speed is fast in the middle of the two ends of the stroke, showing a parabola.

Product application

Applicable valves: ball valve, butterfly valve, plug valve, eccentric rotary valve, etc.

Accessories available: solenoid valve, positioner, limit switch, manual operating mechanism, filter pressure reducing valve, etc.

It is applicable to power plants, chemical industry, oil refining, medicine, water treatment, etc.

technical parameter

Actuator cylinder diameter: 100mm ～ 1000mm

Ambient temperature: standard - 20~80 ° high temperature - 15~150 ° low temperature - 40~80 °

Action form: D-double action, S-single action

Air supply pressure: 3-8bar

Travel angle: 0~90 °

Torque: double action 2000 N.m~250000 N.m single action 1000 N.m~100000 N.m

Protection grade: IP65